Journal Description
Catalysts
Catalysts
is a peer-reviewed open access journal of catalysts and catalyzed reactions published monthly online by MDPI. The Romanian Catalysis Society (RCS) are partners of Catalysts journal and its members receive a discount on the article processing charge.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), Inspec, CAPlus / SciFinder, CAB Abstracts, and other databases.
- Journal Rank: JCR - Q2 (Chemistry, Physical) / CiteScore - Q1 (General Environmental Science)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 14.3 days after submission; acceptance to publication is undertaken in 2.7 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
Impact Factor:
3.9 (2022);
5-Year Impact Factor:
4.2 (2022)
Latest Articles
Ionic Liquid Modification of High-Pt-Loading Pt/C Electrocatalysts for Proton Exchange Membrane Fuel Cell Application
Catalysts 2024, 14(6), 344; https://doi.org/10.3390/catal14060344 (registering DOI) - 25 May 2024
Abstract
Ionic liquid modification for carbon-supported platinum (Pt/C) electrocatalysts to enhance their oxygen reduction reaction (ORR) activity has been well recognized. However, the research has only been reported on the low-Pt-loading Pt/C electrocatalysts, e.g., 20 wt%, while in practical applications, usually high-Pt-loading Pt/C electrocatalysts
[...] Read more.
Ionic liquid modification for carbon-supported platinum (Pt/C) electrocatalysts to enhance their oxygen reduction reaction (ORR) activity has been well recognized. However, the research has only been reported on the low-Pt-loading Pt/C electrocatalysts, e.g., 20 wt%, while in practical applications, usually high-Pt-loading Pt/C electrocatalysts of 45–60 wt% are used. In this work, ionic liquid modification is systematically investigated for a Pt/C electrocatalyst with 60 wt% Pt loading for its ORR activity in the cathode in proton exchange membrane fuel cells (PEMFCs). Various adsorption amounts are studied on the catalyst surface. Different modification behavior is found. Mechanism exploration shows that the adsorption of ionic liquid mainly happens on the Pt electrocatalyst surface and in the micropores of the carbon support. The highest fuel cell power performance is achieved at an ionic liquid loading of 7 wt%, which is much higher than the 3 wt% reported for the low-Pt-loading Pt/C.
Full article
(This article belongs to the Special Issue Ionic Liquids and Eutectic Mixtures for Green Catalytic Processes)
►
Show Figures
Open AccessReview
Recent Advances in Graphene-Based Single-Atom Photocatalysts for CO2 Reduction and H2 Production
by
Muhammad Yasir Akram, Tuba Ashraf, Muhammad Saqaf Jagirani, Ahsan Nazir, Muhammad Saqib and Muhammad Imran
Catalysts 2024, 14(6), 343; https://doi.org/10.3390/catal14060343 (registering DOI) - 24 May 2024
Abstract
The extensive use of single-atom catalysts (SACs) has appeared as a significant area of investigation in contemporary study. The single-atom catalyst, characterized by its maximum atomic proficiency and great discernment of the transition-metal center, has a unique combination of benefits from both heterogeneous
[...] Read more.
The extensive use of single-atom catalysts (SACs) has appeared as a significant area of investigation in contemporary study. The single-atom catalyst, characterized by its maximum atomic proficiency and great discernment of the transition-metal center, has a unique combination of benefits from both heterogeneous and homogeneous catalysts. Consequently, it effectively bridges the gap between these two types of catalysts, leveraging their distinctive features. The utilization of SACs immobilized on graphene substrates has garnered considerable interest, primarily because of their capacity to facilitate selective and efficient photocatalytic processes. This review aims to comprehensively summarize the progress and potential uses of SACs made from graphene in photocatalytic carbon dioxide (CO2) reduction and hydrogen (H2) generation. The focus is on their contribution to converting solar energy into chemical energy. The present study represents the various preparation methods and characterization approaches of graphene-based single-atom photocatalyst This review investigates the detailed mechanisms underlying these photocatalytic processes and discusses recent studies that have demonstrated remarkable H2 production rates through various graphene-based single-atom photocatalysts. Additionally, the pivotal roleof theoretical simulations, likedensity functional theory (DFT), to understand the structural functional relationships of these SACs are discussed. The potential of graphene-based SACs to revolutionize solar-to-chemical energy conversion through photocatalytic CO2 reduction and H2 production is underscored, along with addressing challenges and outlining future directions for this developing area of study. By shedding light on the progress and potential of these catalysts, this review contributes to the collective pursuit of sustainable and efficient energy conversion strategies to mitigate the global climate crisis.
Full article
(This article belongs to the Special Issue Recent Advances in Photo/Electrocatalytic Water Splitting)
Open AccessArticle
On-Purpose Oligomerization by 2-t-Butyl-4-arylimino-2,3-dihydroacridylnickel(II) Bromides
by
Song Zou, Zheng Wang, Yizhou Wang, Yanping Ma, Yang Sun and Wen-Hua Sun
Catalysts 2024, 14(6), 342; https://doi.org/10.3390/catal14060342 - 24 May 2024
Abstract
In this study, 2-t-butyl-4-arylimino-2,3-dihydroacridylnickel dibromides were synthesized by nickel-template one-pot condensation, and well characterized along with the single-crystal X-ray diffraction to one representative complex, revealing a distorted tetrahedral geometry around nickel. When activated with modified methylaluminoxane (MMAO), all nickel complexes exhibited
[...] Read more.
In this study, 2-t-butyl-4-arylimino-2,3-dihydroacridylnickel dibromides were synthesized by nickel-template one-pot condensation, and well characterized along with the single-crystal X-ray diffraction to one representative complex, revealing a distorted tetrahedral geometry around nickel. When activated with modified methylaluminoxane (MMAO), all nickel complexes exhibited high activities (up to 1.91 × 106 g mol−1 (Ni) h−1) toward major trimerization of ethylene. When activated with ethylaluminum dichloride (EtAlCl2), however, the title complexes performed good activities (up to 1.05 × 106 g mol−1 (Ni) h−1) for selective dimerization of ethylene. In comparison to analogous nickel complexes, higher activities were achieved with the substituent of t-butyl group, especially in the rare case of nickel complexes performing trimerization of ethylene.
Full article
(This article belongs to the Section Catalysis in Organic and Polymer Chemistry)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Efficient Charge Transfer of p-n Heterojunction UiO-66-NH2/CuFe2O4 Composite for Photocatalytic Hydrogen Production
by
Mariyappan Shanmugam, Nithish Agamendran and Karthikeyan Sekar
Catalysts 2024, 14(6), 341; https://doi.org/10.3390/catal14060341 - 24 May 2024
Abstract
Using a p-n heterojunction is one of the efficient methods to increase charge transfer in photocatalysis applications. So, herein, p-type UiO-66 (NH2) and n-type CuFe2O4 (CFO) are used to form an effective p-n heterojunction. Due to their poor
[...] Read more.
Using a p-n heterojunction is one of the efficient methods to increase charge transfer in photocatalysis applications. So, herein, p-type UiO-66 (NH2) and n-type CuFe2O4 (CFO) are used to form an effective p-n heterojunction. Due to their poor charge separation in their pristine form, both UiO-66 (NH2) and CFO materials cannot produce hydrogen; however, the composite p-n heterojunction formed between these materials makes fast charge separation and so hydrogen is efficiently produced. The optimized catalyst UCFO 25% produces a maximum of 62.5 µmol/g/h hydrogen in an aqueous methanol solution. The formation of a p-n heterojunction is confirmed by Mott–Schottky analysis and optical properties, crystallinity and the local atomic environment of the material was analyzed by various analytical tools like UV-Vis spectroscopy, XRD, and XANES.
Full article
(This article belongs to the Special Issue Advances in Photo(electro)catalytic Hydrogen Production)
Open AccessArticle
Engineering the Integration of Titanium and Nickel into Zinc Oxide Nanocomposites through Nanolayered Structures and Nanohybrids to Design Effective Photocatalysts for Purifying Water from Industrial Pollutants
by
Osama Saber, Aya Osama, Nagih M. Shaalan and Mostafa Osama
Catalysts 2024, 14(6), 340; https://doi.org/10.3390/catal14060340 - 24 May 2024
Abstract
Water pollution is one of the main challenges currently facing scientists around the world because of the rapid growth in industrial activities. On this basis, 2D nanolayered and nanohybrid structures, which are based on a ternary system of nickel–titanium–zinc, are considered favorable sources
[...] Read more.
Water pollution is one of the main challenges currently facing scientists around the world because of the rapid growth in industrial activities. On this basis, 2D nanolayered and nanohybrid structures, which are based on a ternary system of nickel–titanium–zinc, are considered favorable sources for designing effective nanocomposites for the photocatalytic degradation of industrial pollutants in a short period of time. These nanocomposites were designed by modifying two-dimensional nanolayers to produce a three-dimensional porous structure of multi-doped Ni/Ti-ZnO nanocomposites. Additionally, another additive was produced by constructing nanohybrids of nickel–titanium–zinc combined with a series of hydrocarbons (n-capric acid, myristic acid, stearic acid, suberic acid, and sebacic acid). Energy-dispersive X-ray spectrometry, X-ray diffraction, scanning electron microscopy, infrared spectroscopy, and thermal analyses confirmed the growth of the nanolayered and nanohybrid materials in addition to the production of nanocomposites. The positive role of the dopants (nickel and titanium) in producing an effective photocatalyst was observed through a significant narrowing of the band gap of zinc oxide to 3.05–3.10 eV. Additionally, the high photocatalytic activity of this nanocomposite enabled the complete removal of colored dye from water after 25 min of UV radiation. In conclusion, this study proposes an unconventional approach for designing new optical nanocomposites for purifying water. Additionally, it suggests a novel supporting method for designing new kinds of nanohybrids based on multi-metals and organic acids.
Full article
(This article belongs to the Special Issue Design and Synthesis of Nanostructured Catalysts, 2nd Edition)
►▼
Show Figures
Graphical abstract
Open AccessEditorial
Editorial: Biomass Derived Heterogeneous and Homogeneous Catalysts, 2nd Edition
by
José María Encinar Martín and Sergio Nogales-Delgado
Catalysts 2024, 14(6), 339; https://doi.org/10.3390/catal14060339 - 23 May 2024
Abstract
There are plenty of challenges related to the current energy situation [...]
Full article
(This article belongs to the Special Issue Biomass Derived Heterogeneous and Homogeneous Catalysts, 2nd Edition)
Open AccessArticle
Na2SO3-Promoted Heck Coupling and Homo-Coupling of Arylhydrazines at Room Temperature
by
Jianxiong Du, Wanhe Wang, Jin-Biao Liu and Nianhua Luo
Catalysts 2024, 14(6), 338; https://doi.org/10.3390/catal14060338 - 22 May 2024
Abstract
A novel protocol facilitated by Na2SO3 that enhances the efficiency of palladium-catalyzed Heck coupling and the homo-coupling reactions of arylhydrazines. This innovative method enables the effective construction of a diverse array of cinnamate derivatives and biphenyl compounds. Notably, these transformative
[...] Read more.
A novel protocol facilitated by Na2SO3 that enhances the efficiency of palladium-catalyzed Heck coupling and the homo-coupling reactions of arylhydrazines. This innovative method enables the effective construction of a diverse array of cinnamate derivatives and biphenyl compounds. Notably, these transformative reactions proceed smoothly at room temperature, leveraging the activation of C-N bonds. This technique not only streamlines the synthesis process but also expands our understanding and expertise in the realm of coupling reactions.
Full article
(This article belongs to the Special Issue Catalysis for Functionalization Reaction of Hydrocarbons Compounds)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Green Synthesis of Novel Rhododendron arboreum-Based Zinc Oxide Nanoparticles for Enhanced Antimicrobial and Photocatalytic Degradation Activities
by
Sajid Ali, Sidra, Tanveer Asghar, Muhammad Ishtiaq Jan, Muhammad Waqas, Tahir Ali, Riaz Ullah and Ahmed Bari
Catalysts 2024, 14(6), 337; https://doi.org/10.3390/catal14060337 - 22 May 2024
Abstract
Zinc oxide nanoparticles (ZnO NPs) are becoming an innovative agent in biological and environmental applications due to its unique characteristics, biocompatibility, low cost and toxicity. In this study, the composite ZnO NPs using Rhododendron arboreum (R. arboreum) stem bark were synthesized
[...] Read more.
Zinc oxide nanoparticles (ZnO NPs) are becoming an innovative agent in biological and environmental applications due to its unique characteristics, biocompatibility, low cost and toxicity. In this study, the composite ZnO NPs using Rhododendron arboreum (R. arboreum) stem bark were synthesized and characterized for UV–visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The biomedical assessment of the synthesized nanoparticles showed zones of inhibition of 23 ± 0.09, 18 ± 0.1 and 16 ± 0.05 mm, against the Klebsiella pneumoniae (K. pneumoniae), Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) strains, respectively. Likewise, the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) values against K. pneumoniae, S. aureus, and E. coli were found to be 34 ± 0.21 and 72.71 ± 0.47, 47 ± 0.11 and 94.86 ± 0.84 and 94 ± 0.18 and 185.43 ± 0.16 µg/mL, respectively. The biosynthesized ZnO NPs resulted in significant eradication of the outer and inner membranes of the tested bacterial cells. In addition, the environmental application of the synthesized ZnO NPs also showed time-dependent photocatalytic degradation activity and revealed 65% methyl orange dye degradation with an irradiation period of 6 h. The findings of this study suggest the suitability of the novel R. arboreum stem bark-based ZnO NPs as an effective ameliorant against bactericidal activities and photocatalytic potential for the removal of potentially toxic substances from water.
Full article
(This article belongs to the Section Photocatalysis)
►▼
Show Figures
Figure 1
Open AccessReview
Magnetic Iron Oxide Nanomaterials for Lipase Immobilization: Promising Industrial Catalysts for Biodiesel Production
by
Farid Hajareh Haghighi, Roya Binaymotlagh, Cleofe Palocci and Laura Chronopoulou
Catalysts 2024, 14(6), 336; https://doi.org/10.3390/catal14060336 - 22 May 2024
Abstract
Biodiesel is a mixture of fatty acid alkyl esters (FAAEs) mainly produced via transesterification reactions among triglycerides and short-chain alcohols catalyzed by chemical catalysts (e.g., KOH, NaOH). Lipase-assisted enzymatic transesterification has been proposed to overcome the drawbacks of chemical synthesis, such as high
[...] Read more.
Biodiesel is a mixture of fatty acid alkyl esters (FAAEs) mainly produced via transesterification reactions among triglycerides and short-chain alcohols catalyzed by chemical catalysts (e.g., KOH, NaOH). Lipase-assisted enzymatic transesterification has been proposed to overcome the drawbacks of chemical synthesis, such as high energy consumption, expensive separation of the catalyst from the reaction mixture and production of large amounts of wastewater during product separation and purification. However, one of the main drawbacks of this process is the enzyme cost. In recent years, nano-immobilized lipases have received extensive attention in the design of robust industrial biocatalysts for biodiesel production. To improve lipase catalytic efficiency, magnetic nanoparticles (MNPs) have attracted growing interest as versatile lipase carriers, owing to their unique properties, such as high surface-to-volume ratio and high enzyme loading capacity, low cost and inertness against chemical and microbial degradation, biocompatibility and eco-friendliness, standard synthetic methods for large-scale production and, most importantly, magnetic properties, which provide the possibility for the immobilized lipase to be easily separated at the end of the process by applying an external magnetic field. For the preparation of such effective magnetic nano-supports, various surface functionalization approaches have been developed to immobilize a broad range of industrially important lipases. Immobilization generally improves lipase chemical-thermal stability in a wide pH and temperature range and may also modify its catalytic performance. Additionally, different lipases can be co-immobilized onto the same nano-carrier, which is a highly effective strategy to enhance biodiesel yield, specifically for those feedstocks containing heterogeneous free fatty acids (FFAs). This review will present an update on the use of magnetic iron oxide nanostructures (MNPs) for lipase immobilization to catalyze transesterification reactions for biodiesel production. The following aspects will be covered: (1) common organic modifiers for magnetic nanoparticle support and (2) recent studies on modified MNPs-lipase catalysts for biodiesel production. Aspects concerning immobilization procedures and surface functionalization of the nano-supports will be highlighted. Additionally, the main features that characterize these nano-biocatalysts, such as enzymatic activity, reusability, resistance to heat and pH, will be discussed. Perspectives and key considerations for optimizing biodiesel production in terms of sustainability are also provided for future studies.
Full article
(This article belongs to the Special Issue Catalytical Methods for the Production of Fine and Bulk Chemicals and Biomaterials from Biomass)
►▼
Show Figures
Figure 1
Open AccessArticle
Efficient Electron Transfer in g-C3N4/TiO2 Heterojunction for Enhanced Photocatalytic CO2 Reduction
by
Peng Jiang, Yang Yu, Kun Wang and Wenrui Liu
Catalysts 2024, 14(6), 335; https://doi.org/10.3390/catal14060335 - 22 May 2024
Abstract
Excessive emissions of carbon dioxide have led to the greenhouse effect and global warming. Reducing carbon dioxide into high-value-added chemicals through solar energy is a promising approach. Herein, a g-C3N4/TiO2 heterojunction photocatalyst with efficient electron transfer is designed
[...] Read more.
Excessive emissions of carbon dioxide have led to the greenhouse effect and global warming. Reducing carbon dioxide into high-value-added chemicals through solar energy is a promising approach. Herein, a g-C3N4/TiO2 heterojunction photocatalyst with efficient electron transfer is designed for photocatalytic CO2 reduction. The CH4 (18.32 µmol·h−1·g−1) and CO (25.35 µmol·h−1·g−1) evolution rates of g-C3N4/TiO2 are higher than those of g-C3N4 and TiO2. The enhanced photocatalytic CO2 reduction performance is attributed to the efficient charge carrier transfer in the g-C3N4/TiO2 heterojunction. The electron transfer route was verified by in situ irradiated X-ray photoelectron spectroscopy (XPS). The photocatalytic CO2 reduction mechanism on g-C3N4/TiO2 was investigated by in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). This work provides a strategy for designing a polymer/metallic oxide heterojunction with efficient electron transfer for enhanced photocatalytic CO2 reduction.
Full article
(This article belongs to the Special Issue Non-precious Metal Catalysts for Energy and Environment-Related Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Construction of a Novel Ternary GQDs/g-C3N4/ZIF-67 Photocatalyst for Enhanced Photocatalytic Carbon Dioxide Reduction
by
Zhiyuan Zhao, Jingjing Wang, Congnian Xu, Zhao Du, Rongrong Yu, Yongqi Zhao, Jiayi Han, Jingtao Zuo, Zhonglu Guo, Chengchun Tang and Yi Fang
Catalysts 2024, 14(6), 334; https://doi.org/10.3390/catal14060334 - 21 May 2024
Abstract
In this study, graphene quantum dots (GQDs) have been incorporated into the g-C3N4/ZIF-67 heterojunction system as a photosensitizer to enhance photocatalytic conversion of CO2-to-CO. The GQDs are deposited onto the surface of g-C3N4/ZIF-67
[...] Read more.
In this study, graphene quantum dots (GQDs) have been incorporated into the g-C3N4/ZIF-67 heterojunction system as a photosensitizer to enhance photocatalytic conversion of CO2-to-CO. The GQDs are deposited onto the surface of g-C3N4/ZIF-67 using a simple water bath procedure. As expected, GQDs/g-C3N4/ZIF-67 presents outstanding performance in CO2 photoreduction. Among the GQDs/g-C3N4/ZIF-67 ternary photocatalysts, 7 GQDs-CN/ZIF-67 exhibits the best photocatalytic CO2 reduction ability with a CO yield of 51.71 μmol g−1, which is 5.05 and 1.87 times more than pristine g-C3N4 (10.24 μmol g−1) and g-C3N4/ZIF-67 (27.65 μmol g−1), respectively. This result shows that upon combination of GQDs with ZIF-67/g-C3N4, GQDs can be used as photosensitizers to improve the optical absorption capacity of the photocatalyst. Furthermore, GQDs serve as electron channels, facilitating the transport of photo-induced electrons from ZIF-67 to g-C3N4, which promotes photogenerated carrier separation efficiency. This study innovatively adds GQDs to the heterojunction and applies the prepared ternary composite to the CO2 photoreduction, which inspires a novel direction for the design of non-noble metal photocatalysts.
Full article
(This article belongs to the Section Photocatalysis)
Open AccessArticle
Enhancing the Visible Light Photocatalytic Activity of TiO2-Based Coatings by the Addition of Exfoliated g-C3N4
by
Ilias Papailias, Nadia Todorova, Tatiana Giannakopoulou, Niki Plakantonaki, Michail Vagenas, Panagiotis Dallas, George C. Anyfantis, Ioannis Arabatzis and Christos Trapalis
Catalysts 2024, 14(5), 333; https://doi.org/10.3390/catal14050333 - 20 May 2024
Abstract
In the last few years, increasing interest from researchers and companies has been shown in the development of photocatalytic coatings for air purification and self-cleaning applications. In order to maintain the photocatalyst’s concentration as low as possible, highly active materials and/or combinations of
[...] Read more.
In the last few years, increasing interest from researchers and companies has been shown in the development of photocatalytic coatings for air purification and self-cleaning applications. In order to maintain the photocatalyst’s concentration as low as possible, highly active materials and/or combinations of them are required. In this work, novel photocatalytic formulations containing g-C3N4/TiO2 composites were prepared and deposited in the form of coatings on a-block substrates. The obtained photocatalytic surfaces were tested for NOx and acetaldehyde removal from model air. It was found that the addition of only 0.5 wt% g-C3N4 towards TiO2 content results in over 50% increase in the photocatalytic activity under visible light irradiation in comparison to pure TiO2 coating, while the activity under UV light was not affected. The result was related to the creation of a g-C3N4/TiO2 heterojunction that improves the light absorption and the separation of photogenerated electron-hole pairs, as well as to the inhibition of TiO2 particles’ agglomeration due to the presence of g-C3N4 sheets.
Full article
(This article belongs to the Special Issue Recent Advances in g-C3N4-Based Photocatalysts)
►▼
Show Figures
Figure 1
Open AccessArticle
Glucose Isomerization to Fructose Catalyzed by MgZr Mixed Oxides in Aqueous Solution
by
Xiongxiong Zuo and Xing Tang
Catalysts 2024, 14(5), 332; https://doi.org/10.3390/catal14050332 - 18 May 2024
Abstract
The catalytic isomerization of glucose to fructose plays a pivotal role in the application of biomass as a feedstock for chemicals. Herein, we propose a facile solid-state-grinding strategy to construct ZrO2/MgO mixed oxides, which offered an excellent fructose yield of over
[...] Read more.
The catalytic isomerization of glucose to fructose plays a pivotal role in the application of biomass as a feedstock for chemicals. Herein, we propose a facile solid-state-grinding strategy to construct ZrO2/MgO mixed oxides, which offered an excellent fructose yield of over 34.55% and a high selectivity of 80.52% (80 °C, 2 h). The co-mingling of amphiphilic ZrO2 with MgO improved the unfavorable moderate/strongly basic site distribution on MgO, which can prohibit the side reactions during the reaction and enhance the fructose selectivity. Based on the catalyst characterizations, MgO was deposited on the ZrO2 surface by plugging the pores, and the addition of ZrO2 lessened the quantity of strongly basic sites of MgO. Additionally, the presence of ZrO2 largely enhanced the catalyst stability in comparison with pure MgO by recycling experiments.
Full article
(This article belongs to the Section Biomass Catalysis)
►▼
Show Figures
Graphical abstract
Open AccessEditorial
Nanotechnology in Catalysis, 2nd Edition
by
Maria J. Sabater
Catalysts 2024, 14(5), 331; https://doi.org/10.3390/catal14050331 - 17 May 2024
Abstract
Catalysis is considered a central field in nanoscience and nanotechnology, given that the use of nanoscale structures has played a central role in the development of nanomaterials such as catalysts (nanocatalysts) for decades [...]
Full article
(This article belongs to the Special Issue Nanotechnology in Catalysis, 2nd Edition)
Open AccessArticle
Investigating the Inhibitory Factors of Sucrose Hydrolysis in Sugar Beet Molasses with Yeast and Invertase
by
Mikael Sjölin, Maria Djärf, Mohamed Ismail, Herje Schagerlöf, Ola Wallberg, Rajni Hatti-Kaul and Mahmoud Sayed
Catalysts 2024, 14(5), 330; https://doi.org/10.3390/catal14050330 - 17 May 2024
Abstract
Sugar beet molasses is a low-value byproduct from the sugar industry. It contains significant amounts of sucrose (approx. 50% (w/w)), which can be used for many different applications, for example, as feedstock for the production of fuel (as ethanol)
[...] Read more.
Sugar beet molasses is a low-value byproduct from the sugar industry. It contains significant amounts of sucrose (approx. 50% (w/w)), which can be used for many different applications, for example, as feedstock for the production of fuel (as ethanol) and biobased chemicals such as 5-hydoxymethyl furfural (HMF). To produce platform chemicals, sucrose is hydrolyzed into its monomeric C6 sugars: glucose and fructose. When comparing the hydrolysis rates of molasses with a pure sucrose solution, the specific reaction rate is much slower (Qp/x,60min = 93 and 70 gprod L−1 h−1 gcell−1 for pure sucrose and crude molasses, respectively) at the same sucrose concentration (300 g/L) and process conditions. To clarify why molasses inhibits the enzymatic hydrolysis rate, the influence of its viscosity and inorganic and organic composition was investigated. Also, the effects of molasses and treated molasses on pure enzymes, invertase (from Saccharomyces cerevisiae, 0.05 mg/mL), compared with hydrolysis using whole cells of Baker’s yeast (3 mg/mL), were tested. The results indicate an inhibitory effect of potassium (Qp/x,60min = 76 gprod L−1 h−1 gcell−1), generally at high salt concentrations (Qp/x,60min = 67 gprod L−1 h−1 gcell−1), which could be correlated to the solution’s high salt concentrations and possibly the synergistic effects of different ions when applying concentrations that were four times that in the molasses. Also, the viscosity and sucrose purity seem to have an effect, where pure sucrose solutions and thick juice from the sugar mill yielded higher hydrolysis rates (Qp/x,60min = 97 gprod L−1 h−1 gcell−1) than molasses-type solutions with a higher viscosity (Qp/x,60min = 70–74 gprod L−1 h−1 gcell−1). Attempting to further understand the effects of different components on the invertase activity, an in silico investigation was performed, indicating that high salt concentrations affected the binding of sucrose to the active site of the enzyme, which can result in a lower reaction rate. This knowledge is important for future scale-up of the hydrolysis process, since reduced hydrolysis rates require larger volumes to provide a certain productivity, requiring larger process equipment and thereby higher investment costs.
Full article
(This article belongs to the Special Issue Applications of Catalytic Reactions in Promoting the Health of Organisms)
►▼
Show Figures
Figure 1
Open AccessArticle
Controllable Synthesis of Fe2O3/Nickel Cobaltite Electrocatalyst to Enhance Oxidation of Small Molecules
by
Fowzia S. Alamro, Shymaa S. Medany, Nada S. Al-Kadhi, Ayman M. Mostafa, Walaa F. Zaher, Hoda A. Ahmed and Mahmoud A. Hefnawy
Catalysts 2024, 14(5), 329; https://doi.org/10.3390/catal14050329 - 17 May 2024
Abstract
Nickel-based catalysts have been widely recognized as highly promising electrocatalysts for oxidation. Herein, we designed a catalyst surface based on iron oxide electrodeposited on NiCo2O4 spinel oxide. Nickel foam was used as a support for the prepared catalysts. The modified
[...] Read more.
Nickel-based catalysts have been widely recognized as highly promising electrocatalysts for oxidation. Herein, we designed a catalyst surface based on iron oxide electrodeposited on NiCo2O4 spinel oxide. Nickel foam was used as a support for the prepared catalysts. The modified surface was characterized by different techniques like electron microscopy and X-ray photon spectroscopy. The activity of the modified surface was investigated through the electrochemical oxidation of different organic molecules such as urea, ethanol, and ethylene glycol. Therefore, the modified Fe@ NiCo2O4/NF current in 1.0 M NaOH and 1.0 M fuel concentrations reached 31.4, 27.1, and 17.8 mA cm−2 for urea, ethanol, and ethylene glycol, respectively. Moreover, a range of kinetic characteristics parameters were computed, such as the diffusion coefficient, Tafel slope, and transfer coefficient. Chronoamperometry was employed to assess the electrode’s resistance to long-term oxidation. Consequently, the electrode’s activity exhibited a reduction ranging from 17% to 30% over a continuous oxidation period of 300 min.
Full article
(This article belongs to the Special Issue Recent Advances in Energy-Related Materials in Catalysts, 2nd Edition)
►▼
Show Figures
Graphical abstract
Open AccessReview
Recent Developments on CO2 Hydrogenation Performance over Structured Zeolites: A Review on Properties, Synthesis, and Characterization
by
Methene Briones Cutad, Mohammed J. Al-Marri and Anand Kumar
Catalysts 2024, 14(5), 328; https://doi.org/10.3390/catal14050328 - 17 May 2024
Abstract
This review focuses on an extensive synopsis of the recent improvements in CO2 hydrogenation over structured zeolites, including their properties, synthesis methods, and characterization. Key features such as bimodal mesoporous structures, surface oxygen vacancies, and the Si/Al ratio are explored for their
[...] Read more.
This review focuses on an extensive synopsis of the recent improvements in CO2 hydrogenation over structured zeolites, including their properties, synthesis methods, and characterization. Key features such as bimodal mesoporous structures, surface oxygen vacancies, and the Si/Al ratio are explored for their roles in enhancing catalytic activity. Additionally, the impact of porosity, thermal stability, and structural integrity on the performance of zeolites, as well as their interactions with electrical and plasma environments, are discussed in detail. The synthesis of structured zeolites is analyzed by comparing the advantages and limitations of bottom-up methods, including hard templating, soft templating, and non-templating approaches, to top-down methods, such as dealumination, desilication, and recrystallization. The review addresses the challenges associated with these synthesis techniques, such as pore-induced diffusion limitations, morphological constraints, and maintaining crystal integrity, highlighting the need for innovative solutions and optimization strategies. Advanced characterization techniques are emphasized as essential for understanding the catalytic mechanisms and dynamic behaviors of zeolites, thereby facilitating further research into their efficient and effective use. The study concludes by underscoring the importance of continued research to refine synthesis and characterization methods, which is crucial for optimizing catalytic activity in CO2 hydrogenation. This effort is important for achieving selective catalysis and is paramount to the global initiative to reduce carbon emissions and address climate change.
Full article
(This article belongs to the Special Issue Applications of Heterogeneous Catalysts in Green Chemistry)
►▼
Show Figures
Graphical abstract
Open AccessFeature PaperArticle
Study of Oxygen Reduction Reaction on Polycrystalline Rhodium in Acidic and Alkaline Media
by
Jelena Golubović, Miroslava Varničić and Svetlana Štrbac
Catalysts 2024, 14(5), 327; https://doi.org/10.3390/catal14050327 - 16 May 2024
Abstract
This study examines the kinetics and mechanism of the oxygen reduction reaction (ORR) on a polycrystalline rhodium electrode (Rh(poly)) in acidic and alkaline media, using rotating disc electrode measurements. This study found that the ORR activity of the Rh(poly) electrode decreases in the
[...] Read more.
This study examines the kinetics and mechanism of the oxygen reduction reaction (ORR) on a polycrystalline rhodium electrode (Rh(poly)) in acidic and alkaline media, using rotating disc electrode measurements. This study found that the ORR activity of the Rh(poly) electrode decreases in the order of 0.1 M NaOH > 0.1 M HClO4 > 0.05 M H2SO4 concerning the half-wave potentials. The Tafel slopes for ORR on Rh(poly) in the cathodic direction are 60 and 120 mV dec−1 at low and high overpotentials, respectively, in perchloric acid and alkaline solutions. However, strongly adsorbed sulfate anions hinder the ORR on Rh(poly) in sulfuric acid, leading to higher Tafel slopes. The highest ORR activity of Rh(poly) in an alkaline media suggests the promoting role of the specifically adsorbed OH− anions and RhOH. In all cases, ORR on Rh(poly) proceeds through the 4e-series reaction pathway.
Full article
(This article belongs to the Special Issue Exploring the Mechanisms and Kinetics of Electrocatalytic Reactions)
►▼
Show Figures
Figure 1
Open AccessArticle
Optimization of Desulfurization Process via Choline Phosphotungstate Coupled with Persulfate Using Response Surface Methodology
by
Yinke Zhang and Hang Xu
Catalysts 2024, 14(5), 326; https://doi.org/10.3390/catal14050326 - 16 May 2024
Abstract
Using a simple acid-base neutralization method, a Ch-PW solid catalyst was synthesized by mixing choline hydroxide (ChOH) and phosphotungstic acid (HPW) at a 2:1 molar ratio in an aqueous solution. This catalyst was combined with a 20 wt.% potassium peroxymonosulfate (PMS) solution, using
[...] Read more.
Using a simple acid-base neutralization method, a Ch-PW solid catalyst was synthesized by mixing choline hydroxide (ChOH) and phosphotungstic acid (HPW) at a 2:1 molar ratio in an aqueous solution. This catalyst was combined with a 20 wt.% potassium peroxymonosulfate (PMS) solution, using acetonitrile (ACN) as the extraction solvent to create an extraction catalytic oxidative desulfurization system. The optimal desulfurization conditions were determined through response surface methodology, targeting the highest desulfurization rate: 0.99 g of Ch-PW, 1.07 g of PMS, 2.5 g of extraction solvent, at a temperature of 50.48 °C. The predicted desulfurization rate was 90.79%, compared to an experimental rate of 93.64%, with a deviation of 3.04%. A quadratic model correlating the desulfurization rate with the four conditions was developed and validated using ANOVA, which also quantified the impact of each factor on the desulfurization rate: PMS > ACN > Ch-PW > temperature. GC-MS analysis identified the main oxidation product as DBTO2, and the mechanism of desulfurization in this system was further explored.
Full article
(This article belongs to the Section Catalytic Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Nano-Sheets of CsNiVF6 Pyrochlore Electrocatalyst for Enhanced Urea Oxidation and Hydrogen Green Production Reactions
by
Mohamed A. Ghanem, Abdullah M. Al-Mayouf, Khalaf A. Alfudhayli and Mohamed O. Abdelkader
Catalysts 2024, 14(5), 325; https://doi.org/10.3390/catal14050325 - 16 May 2024
Abstract
This study presents the successful synthesis of a cesium–nickel–vanadium fluoride (CsNiVF6) pyrochlore nano-sheet catalyst via solid-phase synthesis and its electrochemical performance in green hydrogen production through urea electrolysis in alkaline media. The physicochemical characterizations revealed that the CsNiVF6 exhibits a
[...] Read more.
This study presents the successful synthesis of a cesium–nickel–vanadium fluoride (CsNiVF6) pyrochlore nano-sheet catalyst via solid-phase synthesis and its electrochemical performance in green hydrogen production through urea electrolysis in alkaline media. The physicochemical characterizations revealed that the CsNiVF6 exhibits a pyrochlore-type structure consisting of a disordered cubic corner-shared (Ni, V)F6 octahedra structure and nano-sheet morphology with a thickness ranging from 10 to 20 nm. Using the CsNiVF6 catalyst, the electrochemical analysis, conducted through cyclic voltammetry, demonstrates a current mass activity of ~1500 mA mg−1, recorded at 1.8 V vs. RHE, along with low-resistance (3.25 ohm) charge transfer and good long-term stability for 0.33 M urea oxidation in an alkaline solution. Moreover, the volumetric hydrogen production rate at the cathode (bare nickel foam) is increased from 12.25 to 39.15 µmol/min upon the addition of 0.33 M urea to a 1.0 KOH solution and at a bias potential of 2.0 V. The addition of urea to the electrolyte solution enhances hydrogen production at the cathode, especially at lower voltages, surpassing the volumes produced in pure 1.0 M KOH solution. This utilization of a CsNiVF6 pyrochlore nano-sheet catalyst and renewable urea as a feedstock contributes to the development of a green and sustainable hydrogen economy. Overall, this research underscores the potential use of CsNiVF6 as a cost-effective nickel-based pyrochlore electrocatalyst for advancing renewable and sustainable urea electrolysis processes toward green hydrogen production.
Full article
(This article belongs to the Special Issue Electrocatalysis for Hydrogen/Oxygen Evolution Reactions)
►▼
Show Figures
Figure 1
Journal Menu
► ▼ Journal Menu-
- Catalysts Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Society Collaborations
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Batteries, Catalysts, Energies, Hydrogen, Sustainability
Preparation, Storage, and Transportation of Green Hydrogen and Multi-Scenario Application Technologies
Topic Editors: Weihua Cai, Chao Xu, Zhonghao Rao, Fuqiang Wang, Ming GaoDeadline: 30 June 2024
Topic in
Catalysts, Coatings, Crystals, Energies, Materials, Nanomaterials
Interfacial Bonding Design and Applications in Structural and Functional Materials
Topic Editors: Junlei Qi, Pengcheng Wang, Yaotian YanDeadline: 20 July 2024
Topic in
Energies, Catalysts, Fermentation, Processes, Waste
Valorizing Waste through Thermal and Biological Processes for Sustainable Energy Production
Topic Editors: Margarida Gonçalves, Cândida VilarinhoDeadline: 31 August 2024
Topic in
Cancers, Catalysts, Current Oncology, Plasma, Sci
Advances in Low-Temperature Plasma Cancer Therapy
Topic Editors: Michael Keidar, Li Lin, Dayun YanDeadline: 20 September 2024
Conferences
Special Issues
Special Issue in
Catalysts
Advances in Photocatalytic and Photothermal Catalytic CO2 Reduction
Guest Editor: Fernando FresnoDeadline: 6 June 2024
Special Issue in
Catalysts
Modern Catalytic Reactor: From Active Center to Application Tests, 2nd Edition
Guest Editors: Anna Gancarczyk, Agnieszka CiemięgaDeadline: 15 June 2024
Special Issue in
Catalysts
Visible Light Photocatalysis: Mechanisms and Applications
Guest Editors: Kunlei Wang, Zhishun Wei, Zuzanna BielanDeadline: 26 June 2024
Special Issue in
Catalysts
Advancement in Gas Adsorption Capacity, Optical and Catalytic Applications of Supramolecular Systems or Hybrid Materials
Guest Editors: Luca Spitaleri, Vincenzo PatamiaDeadline: 10 July 2024
Topical Collections
Topical Collection in
Catalysts
Photocatalytic Water Splitting
Collection Editors: Weilong Shi, Guigao Liu
Topical Collection in
Catalysts
Catalytic Conversion of Biomass to Bioenergy
Collection Editors: Sergio Nogales Delgado, Juan Félix González, Simona M. Coman