We report on the fabrication of a novel design of GaAs/(In,Ga)As/GaAs radial nanowire heterostructures on a Si 111 substrate, where, for the first time, the growth of inhomogeneous shells on a lattice mismatched core results in straight nanowires instead of bent. Nanowire bending caused by axial tensile strain induced by the (In,Ga)As shell on the GaAs core is reversed by axial compressive strain caused by the GaAs outer shell on the (In,Ga)As shell. Progressive nanowire bending and reverse bending in addition to the axial strain evolution during the two processes are accessed by in situ by x-ray diffraction. The diameter of the core, thicknesses of the shells, as well as the indium concentration and distribution within the (In,Ga)As quantum well are revealed by 2D energy dispersive x-ray spectroscopy using a transmission electron microscope. Shell(s) growth on one side of the core without substrate rotation results in planar-like radial heterostructures in the form of free standing straight nanowires.
Purpose-led Publishing is a coalition of three not-for-profit publishers in the field of physical sciences: AIP Publishing, the American Physical Society and IOP Publishing.
Together, as publishers that will always put purpose above profit, we have defined a set of industry standards that underpin high-quality, ethical scholarly communications.
We are proudly declaring that science is our only shareholder.
ISSN: 1361-6528
Nanotechnology encompasses the understanding of the fundamental physics, chemistry, biology and technology of nanometre-scale objects.
Open all abstracts, in this tab
Ali Al Hassan et al 2024 Nanotechnology 35 295705
Wei Cheat Lee et al 2024 Nanotechnology 35 295301
A hierarchical sea urchin-like hybrid metal oxide nanostructure of ZnO nanorods deposited on TiO2 porous hollow hemispheres with a thin zinc titanate interface layer is specifically designed and synthesized to form a combined type I straddling and type II staggered junctions. The HHSs, synthesized by electrospinning, facilitate light trapping and scattering. The ZnO nanorods offer a large surface area for improved surface oxidation kinetics. The interface layer of zinc titanate (ZnTiO3) between the TiO2 HHSs and ZnO nanorods regulates the charge separation in a closely coupled hierarchy structure of ZnO/ZnTiO3/TiO2. The synergistic effects of the improved light trapping, charge separation, and fast surface reaction kinetics result in a superior photoconversion efficiency of 1.07% for the photoelectrochemical water splitting with an outstanding photocurrent density of 2.8 mA cm−2 at 1.23 V versus RHE.
Yucheng Hu et al 2024 Nanotechnology 35 295702
Cathodoluminescence and electron backscatter diffraction have been applied to exactly the same grain boundaries (GBs) in a Cu(In,Ga)S2 solar absorber in order to investigate the influence of microstructure on the radiative recombination behaviour at the GBs. Two different types of GB with different microstructure were analysed in detail: random high angle grain boundaries (RHAGBs) and Σ3 GBs. We found that the radiative recombination at all RHAGBs was inhibited to some extent, whereas at Σ3 GBs three different observations were made: unchanged, hindered, or promoted radiative recombination. These distinct behaviours may be linked to atomic-scale grain boundary structural differences. The majority of GBs also exhibited a small spectral shift of about ±10 meV relative to the local grain interior (GI) and a few of them showed spectral shifts of up to ±40 meV. Red and blue shifts were observed with roughly equal frequency.
Min Fu and Kevin Critchley 2024 Nanotechnology 35 302002
Inkjet printing (IJP) has become a versatile, cost-effective technology for fabricating organic and hybrid electronic devices. Heavy-metal-based quantum dots (HM QDs) play a significant role in these inkjet-printed devices due to their excellent optoelectrical properties. Despite their utility, the intrinsic toxicity of HM QDs limits their applications in commercial products. To address this limitation, developing alternative HM-free quantum dots (HMF QDs) that have equivalent optoelectronic properties to HM QD is a promising approach to reduce toxicity and environmental impact. This article comprehensively reviews HMF QD-based devices fabricated using IJP methods. The discussion includes the basics of IJP technology, the formulation of printable HMF QD inks, and solutions to the coffee ring effect. Additionally, this review briefly explores the performance of typical state-of-the-art HMF QDs and cutting-edge characterization techniques for QD inks and printed QD films. The performance of printed devices based on HMF QDs is discussed and compared with those fabricated by other techniques. In the conclusion, the persisting challenges are identified, and perspectives on potential avenues for further progress in this rapidly developing research field are provided.
Wisut Supasai et al 2024 Nanotechnology 35 315201
A novel way to enhance modulation performance is through the design of a hybrid plasmonic optical modulator that integrates multi-layer graphene and TiO2 on silicon waveguides. In this article, a design is presented of a proposed modulator based on the use of the two-dimensional finite difference eigenmode solver, the three-dimensional eigenmode expansion solver, and the CHARGE solver. Leveraging inherent graphene properties and utilizing the subwavelength confinement capabilities of hybrid plasmonic waveguides (HPWs), we achieved a modulator design that is both compact and highly efficient. The electrical bandwidth f3dB is at 460.42 GHz and it reduces energy consumption to 12.17 fJ/bit with a modulator that functions at a wavelength of 1.55 μm. According to our simulation results, our innovation was the optimization of the third dielectric layer's thickness, setting the stage to achieve greater modulation depths. This synergy between graphene and HPWs not only augments subwavelength confinement, but also optimizes light–graphene interaction, culminating in a markedly enhanced modulation efficiency. As a result, our modulator presents a high extinction ratio and minimized insertion loss. Furthermore, it exhibits polarization insensitivity and a greater bandwidth. Our work sets a new benchmark in optical communication systems, emphasizing the potential for the next generation of chip-scale with high-efficiency optical modulators that significantly outpace conventional graphene-based designs.
Syed Nabeel Ahmed and Waseem Haider 2018 Nanotechnology 29 342001
There has been a considerable amount of research in the development of sustainable water treatment techniques capable of improving the quality of water. Unavailability of drinkable water is a crucial issue especially in regions where conventional drinking water treatment systems fail to eradicate aquatic pathogens, toxic metal ions and industrial waste. The research and development in this area have given rise to a new class of processes called advanced oxidation processes, particularly in the form of heterogeneous photocatalysis, which converts photon energy into chemical energy. Advances in nanotechnology have improved the ability to develop and specifically tailor the properties of photocatalytic materials used in this area. This paper discusses many of those photocatalytic nanomaterials, both metal-based and metal-free, which have been studied for water and waste water purification and treatment in recent years. It also discusses the design and performance of the recently studied photocatalytic reactors, along with the recent advancements in the visible-light photocatalysis. Additionally, the effects of the fundamental parameters such as temperature, pH, catalyst-loading and reaction time have also been reviewed. Moreover, different techniques that can increase the photocatalytic efficiency as well as recyclability have been systematically presented, followed by a discussion on the photocatalytic treatment of actual wastewater samples and the future challenges associated with it.
Karl Berggren et al 2021 Nanotechnology 32 012002
Recent progress in artificial intelligence is largely attributed to the rapid development of machine learning, especially in the algorithm and neural network models. However, it is the performance of the hardware, in particular the energy efficiency of a computing system that sets the fundamental limit of the capability of machine learning. Data-centric computing requires a revolution in hardware systems, since traditional digital computers based on transistors and the von Neumann architecture were not purposely designed for neuromorphic computing. A hardware platform based on emerging devices and new architecture is the hope for future computing with dramatically improved throughput and energy efficiency. Building such a system, nevertheless, faces a number of challenges, ranging from materials selection, device optimization, circuit fabrication and system integration, to name a few. The aim of this Roadmap is to present a snapshot of emerging hardware technologies that are potentially beneficial for machine learning, providing the Nanotechnology readers with a perspective of challenges and opportunities in this burgeoning field.
Achint Jain et al 2018 Nanotechnology 29 265203
Integrating layered two-dimensional (2D) materials into 3D heterostructures offers opportunities for novel material functionalities and applications in electronics and photonics. In order to build the highest quality heterostructures, it is crucial to preserve the cleanliness and morphology of 2D material surfaces that come in contact with polymers such as PDMS during transfer. Here we report that substantial residues and up to ∼0.22% compressive strain can be present in monolayer MoS2 transferred using PDMS. We show that a UV-ozone pre-cleaning of the PDMS surface before exfoliation significantly reduces organic residues on transferred MoS2 flakes. An additional 200 ◦C vacuum anneal after transfer efficiently removes interfacial bubbles and wrinkles as well as accumulated strain, thereby restoring the surface morphology of transferred flakes to their native state. Our recipe is important for building clean heterostructures of 2D materials and increasing the reproducibility and reliability of devices based on them.
U Banin et al 2021 Nanotechnology 32 042003
This roadmap on Nanotechnology for Catalysis and Solar Energy Conversion focuses on the application of nanotechnology in addressing the current challenges of energy conversion: 'high efficiency, stability, safety, and the potential for low-cost/scalable manufacturing' to quote from the contributed article by Nathan Lewis. This roadmap focuses on solar-to-fuel conversion, solar water splitting, solar photovoltaics and bio-catalysis. It includes dye-sensitized solar cells (DSSCs), perovskite solar cells, and organic photovoltaics. Smart engineering of colloidal quantum materials and nanostructured electrodes will improve solar-to-fuel conversion efficiency, as described in the articles by Waiskopf and Banin and Meyer. Semiconductor nanoparticles will also improve solar energy conversion efficiency, as discussed by Boschloo et al in their article on DSSCs. Perovskite solar cells have advanced rapidly in recent years, including new ideas on 2D and 3D hybrid halide perovskites, as described by Spanopoulos et al 'Next generation' solar cells using multiple exciton generation (MEG) from hot carriers, described in the article by Nozik and Beard, could lead to remarkable improvement in photovoltaic efficiency by using quantization effects in semiconductor nanostructures (quantum dots, wires or wells). These challenges will not be met without simultaneous improvement in nanoscale characterization methods. Terahertz spectroscopy, discussed in the article by Milot et al is one example of a method that is overcoming the difficulties associated with nanoscale materials characterization by avoiding electrical contacts to nanoparticles, allowing characterization during device operation, and enabling characterization of a single nanoparticle. Besides experimental advances, computational science is also meeting the challenges of nanomaterials synthesis. The article by Kohlstedt and Schatz discusses the computational frameworks being used to predict structure–property relationships in materials and devices, including machine learning methods, with an emphasis on organic photovoltaics. The contribution by Megarity and Armstrong presents the 'electrochemical leaf' for improvements in electrochemistry and beyond. In addition, biohybrid approaches can take advantage of efficient and specific enzyme catalysts. These articles present the nanoscience and technology at the forefront of renewable energy development that will have significant benefits to society.
Open all abstracts, in this tab
M A González-Reyna et al 2024 Nanotechnology 35 335602
For the first time, this study shows the nanoarchitectonic process to obtain an acetogenin-enriched nanosystem (AuNPs-Ac) using an aqueous extract from Annona cherimola Mill (ACM) composed of gold nanoparticles embedded in an organic matrix that acts as stabilizing agent and presents anti-inflammatory activity and cytotoxical effect against HepG2 cell line, promoting apoptosis. The synthesis of AuNPs-Ac was confirmed by x-ray diffraction analysis, showing metallic gold as the only phase, and the scanning transmission microscope showed an organic cap covering the AuNPs-Ac. Fourier-transformed infrared suggests that the organic cap comprises a combination of different annonaceous acetogenins, alkaloids, and phenols by the presence of bands corresponding to aromatic rings and hydroxyl groups. High-Performance Liquid Chromatography has demonstrated the presence of annonacin, a potent acetogenin, in the extract of ACM. An in vitro anti-inflammatory activity of the extract of ACM and the AuNPs-Ac was performed using the albumin denaturation method, showing a nonlinear response, which is better than sodium diclofenac salt in a wide range of concentrations that goes from 200 to 400 μg ml−1 with both samples. The viability assay was studied using trypan blue, treating IMR90 and HepG2 at different concentrations of AuNPs-Ac. The results defined a median lethal dose of 800 μg ml−1 against HepG2 through apoptosis according to the ratio of caspase-cleaved 9/alpha-tubulin evaluated. It was also demonstrated that the nanosystem presents a higher cytotoxic effect on the HepG2 cell line than in IMR90, suggesting a targeted mechanism. In addition, the nanosystem performs better than using only the extract of ACM in the anti-inflammatory or antiproliferative test, attributed to their higher surface area.
Jiahe Zheng et al 2024 Nanotechnology 35 335402
The decay rate of charge in the friction layer is one of the key factors affecting the output performance of triboelectric nanogenerators (TENG). Reducing the decay rate of the triboelectric charge can increase the charge-carrying capacity of the friction layer and improve the output current and voltage of the TENG. This makes a friction generator more suitable for discontinuous driving environments. In contrast, increasing the decay rate of the charge in the friction layer can greatly improve the recovery time of the device, although it reduces the output performance of the generator. This is conducive to the application of friction generator in the field of sensors. In this study, polystyrene (PS) and carbon nanotubes (CNTs) were added to polyvinylidene fluoride (PVDF) nanofibers to adjust the charge decay time in the friction layer, thereby regulating the output performance of the friction generator and sensor. When the amount of added PS in the PVDF nanofiber reached 20%, the charge density on the friction surface increased by 1.9 times, and the charge decay time decreased by 64 times; when 0.1 wt% CNTs were added in the PVDF nanofiber, the charge decay time increased by more than 10 times. The former is more conducive to improving the power generation performance of the TENG, and the latter significantly improves the stability and repeatability of TENG-based sensors.
I I Olaniyan et al 2024 Nanotechnology 35 335301
The realization of perovskite oxide nanostructures with controlled shape and dimensions remains a challenge. Here, we investigate the use of helium and neon focused ion beam (FIB) milling in an ion microscope to fabricate BaTiO3 nanopillars of sub-500 nm in diameter starting from BaTiO3 (001) single crystals. Irradiation of BaTiO3 with He ions induces the formation of nanobubbles inside the material, eventually leading to surface swelling and blistering. Ne-FIB is shown to be suitable for milling without inducing surface swelling. The resulting structures are defect-free single crystal nanopillars, which are enveloped, on the top and lateral sidewalls, by a point defect-rich crystalline region and an outer Ne-rich amorphous layer. The amorphous layer can be selectively etched by dipping in diluted HF. The geometry and beam-induced damage of the milled nanopillars depend strongly on the patterning parameters and can be well controlled. Ne ion milling is shown to be an effective method to rapidly prototype BaTiO3 crystalline nanostructures.
P R Jadhav et al 2024 Nanotechnology 35 335701
The tunability of the transition metal dichalcogenide properties has gained attention from numerous researchers due to their wide application in various fields including quantum technology. In the present work, WS2 has been deposited on fluorine doped tin oxide substrate and its properties have been studied systematically. These samples were irradiated using gamma radiation for various doses, and the effect on structural, morphological, optical and electrical properties has been reported. The crystallinity of the material is observed to be decreased, and the results are well supported by x-ray diffraction, Raman spectroscopy techniques. The increase in grain boundaries has been supported by the agglomeration observed in the scanning electron microscopy micrographs. The XPS results of WS2 after gamma irradiation show evolution of oxygen, carbon, C=O, W–O and SO4−2 peaks, confirming the addition of impurities and formation of point defect. The gamma irradiation creates point defects, and their density increases considerably with increasing gamma dosage. These defects crucially altered the structural, optical and electrical properties of the material. The reduction in the optical band gap with increased gamma irradiation is evident from the absorption spectra and respective Tauc plots. The I–V graphs show a 1000-fold increase in the saturation current after 100 kGy gamma irradiation dose. This work has explored the gamma irradiation effect on the WS2 and suggests substantial modification in the material and enhancement in electrical properties.
Ziyu Shen et al 2024 Nanotechnology 35 335601
Conventional metal sulfide (SnS2) gas-sensitive sensing materials still have insufficient surface area and slow response/recovery times. To increase its gas-sensing performance, MoS2 nanoflower was produced hydrothermally and mechanically combined with SnS2 nanoplate. Extensive characterization results show that MoS2 was effectively integrated into SnS2. Four different concentrations of SnS2–MoS2 composites were evaluated for their NO2 gas sensitization capabilities. Among them, SnS2–15% MoS2 at 170 °C demonstrated the greatest response values to NO2, 7.3 for 1 ppm NO2, which is about three times greater than the SnS2 sensor at 170 °C (2.58). The creation of pn junctions following compositing with SnS2 was determined to be the primary reason for the composite's faster recovery time, while the heterojunction allowed for the rapid separation of hole–electron pairs. Because the MoS2 surface has multiple vacancy defects, the adsorption energy of these vacancies is significantly higher than that of other places, resulting in increased NO2 adsorption. Furthermore, MoS2 can serve as active adsorption sites for SnS2 micrometer sheets during gas sensing. This study may help to build new NO2 gas sensors.
Open all abstracts, in this tab
Yuming Feng et al 2024 Nanotechnology 35 322001
The exploration and synthesis of novel materials are integral to scientific and technological progress. Since the prediction and synthesis of two-dimensional (2D) materials, it is expected to play an important role in the application of industrialization and the information age, resulting from its excellent physical and chemical properties. Currently, researchers have effectively utilized a range of material synthesis techniques, including mechanical exfoliation, redox reactions, chemical vapor deposition, and chemical vapor transport, to fabricate two-dimensional materials. However, despite their rapid development, the widespread industrial application of 2D materials faces challenges due to demanding synthesis requirements and high costs. To address these challenges, assisted growth techniques such as salt-assisted, gas-assisted, organic-assisted, and template-assisted growth have emerged as promising approaches. Herein, this study gives a summary of important developments in recent years in the assisted growth synthesis of 2D materials. Additionally, it highlights the current difficulties and possible benefits of the assisted-growth approach for 2D materials. It also highlights novel avenues of development and presents opportunities for new lines of investigation.
Min Fu and Kevin Critchley 2024 Nanotechnology 35 302002
Inkjet printing (IJP) has become a versatile, cost-effective technology for fabricating organic and hybrid electronic devices. Heavy-metal-based quantum dots (HM QDs) play a significant role in these inkjet-printed devices due to their excellent optoelectrical properties. Despite their utility, the intrinsic toxicity of HM QDs limits their applications in commercial products. To address this limitation, developing alternative HM-free quantum dots (HMF QDs) that have equivalent optoelectronic properties to HM QD is a promising approach to reduce toxicity and environmental impact. This article comprehensively reviews HMF QD-based devices fabricated using IJP methods. The discussion includes the basics of IJP technology, the formulation of printable HMF QD inks, and solutions to the coffee ring effect. Additionally, this review briefly explores the performance of typical state-of-the-art HMF QDs and cutting-edge characterization techniques for QD inks and printed QD films. The performance of printed devices based on HMF QDs is discussed and compared with those fabricated by other techniques. In the conclusion, the persisting challenges are identified, and perspectives on potential avenues for further progress in this rapidly developing research field are provided.
Antonio del Bosque et al 2024 Nanotechnology 35 292003
The fundamentals, performance, and applications of piezoresistive strain sensors based on polymer nanocomposites are summarized herein. The addition of conductive nanoparticles to a flexible polymer matrix has emerged as a possible alternative to conventional strain gauges, which have limitations in detecting small strain levels and adapting to different surfaces. The evaluation of the properties or performance parameters of strain sensors such as the elongation at break, sensitivity, linearity, hysteresis, transient response, stability, and durability are explained in this review. Moreover, these nanocomposites can be exposed to different environmental conditions throughout their lifetime, including different temperature, humidity or acidity/alkalinity levels, that can affect performance parameters. The development of flexible piezoresistive sensors based on nanocomposites has emerged in recent years for applications related to the biomedical field, smart robotics, and structural health monitoring. However, there are still challenges to overcome in designing high-performance flexible sensors for practical implementation. Overall, this paper provides a comprehensive overview of the current state of research on flexible piezoresistive strain sensors based on polymer nanocomposites, which can be a viable option to address some of the major technological challenges that the future holds.
Songjun Feng and Hui Liu 2024 Nanotechnology 35 302001
Lithium-ion batteries (LIBs) has extensively utilized in electric vehicles and portable electronics due to their high energy density and prolonged lifespan. However, the current commercial LIBs are plagued by relatively low energy density. High-entropy materials with multiple components have emerged as an efficient strategic approach for developing novel materials that effectively improve the overall performance of LIBs. This article provides a comprehensive review the recent advancements in rational design of innovative high-entropy materials for LIBs, as well as the exceptional lithium ion storage mechanism for high-entropy electrodes and considerable ionic conductivity for high-entropy electrolytes. This review also analyses the prominent effects of individual components on the high-entropy materials' exceptional capacity, considerable structural stability, rapid lithium ion diffusion, and excellent ionic conductivity. Furthermore, this review presents the synthesis methods and their influence on the morphology and properties of high-entropy materials. Ultimately, the remaining challenges and future research directions are outlined, aimed at developing more effective high-entropy materials and improving the overall electrochemical performance of LIBs.
Haonan Zhao et al 2024 Nanotechnology 35 292002
Recent advances in materials science, device designs and advanced fabrication technologies have enabled the rapid development of transient electronics, which represents a class of devices or systems that their functionalities and constitutions can be partially/completely degraded via chemical reaction or physical disintegration over a stable operation. Therefore, numerous potentials, including zero/reduced waste electronics, bioresorbable electronic implants, hardware security, and others, are expected. In particular, transient electronics with biocompatible and bioresorbable properties could completely eliminate the secondary retrieval surgical procedure after their in-body operation, thus offering significant potentials for biomedical applications. In terms of material strategies for the manufacturing of transient electronics, silicon nanomembranes (SiNMs) are of great interest because of their good physical/chemical properties, modest mechanical flexibility (depending on their dimensions), robust and outstanding device performances, and state-of-the-art manufacturing technologies. As a result, continuous efforts have been made to develop silicon-based transient electronics, mainly focusing on designing manufacturing strategies, fabricating various devices with different functionalities, investigating degradation or failure mechanisms, and exploring their applications. In this review, we will summarize the recent progresses of silicon-based transient electronics, with an emphasis on the manufacturing of SiNMs, devices, as well as their applications. After a brief introduction, strategies and basics for utilizing SiNMs for transient electronics will be discussed. Then, various silicon-based transient electronic devices with different functionalities are described. After that, several examples regarding on the applications, with an emphasis on the biomedical engineering, of silicon-based transient electronics are presented. Finally, summary and perspectives on transient electronics are exhibited.
Open all abstracts, in this tab
Deng et al
Artificially synthesized DNA is involved in the construction of a library of oil tracers due to their unlimited number and no-biological toxicity. The strategy of the construction is proposed by oleophilic Silica-encapsulated DNA nanoparticles, which offers fresh thinking in developing novel tracers, sensors, and molecular machines in engineering & applied sciences based on artificially synthesized DNA blocks.
Neelamkodan et al
A low-temperature polymer-assisted wet chemical method was used to synthesise Cu-doped ZnO bicone nanoflowers at three different PEG concentrations.The effects of PEG concentration on the structural, morphological and optical properties of Cu doped ZnO nanostructures were studied. X-ray diffraction studies revealed that the as-synthesized ZnO nanostructures are highly crystalline with a hexagonal wurtzite phase. The scanning electron microscopy (SEM) analysis showed that the prepared nanostructures have bicone-nanoflower morphology and PEG concentration has strongly influenced the size as well the shape of nanoflowers. The surface passivation effect of PEG on the band gap energies was studied by analysing UV -visible spectra of all the samples. The room-temperature fluorescent spectra of all the nanoflowers showed multiple peak emissions, both in the ultra-violet and visible regions, with varying intensities.These recasted multiple peaks are attributed to the morphological modification caused by the PEG addition.
Irusta et al
Motivated by the recent interest in the hydrogen energy, we have carried out a complete study of the catalytic activity of a defective molybdenum disulfide monolayer (MoS2) by means of density functional theory (DFT) calculations. The MoS2 monolayer is characterized by a nonreactive basal plane. In principle, its catalytic activity is concentrated at the edges, but an alternative way to increase such activity is obtained by creating active sites where the molecules can dissociate. These defects can be easily produced experimentally by different techniques. In our study, we have performed an atomic, energetic and electronic analysis of a hydrogen molecule adsorbed on a MoS2 monolayer. In a first step, we have found that the H2 molecule remains physisorbed over both doped-free and Nb-doped MoS2 monolayers, showing that the Nb atom does not increase the poor reactivity of the clean MoS2 layer. 
Interestingly, our energetic results suggest that the vacancies will prefer to be formed close to the Nb atoms in the doped monolayer, but the small energy difference would allow the formation in non-doped like sites. Theoretically, we found out the conditions for the molecular dissociation on a S vacancy. In both cases, with and without Nb, the molecule should rotate from the original perpendicular position to an almost parallel orientation jumping an energetic barrier. After that, the atoms are separated binding to the Mo atoms around the missing S atom. Our ab initio molecular dynamics simulations show that for low pressure conditions (using one single molecule in the system) the H2 prefers to desorb from the vacancy, while for larger pressures (when additional H2 molecules are added to the system) the molecule is finally dissociated on the vacancy. Our long simulations confirm the great stability of the structure with the two H atoms binding to the Mo atoms close to the vacancy. 
Finally, the inclusion of a third (or a fourth) H atom in the vacancy leads to the formation and desorption of a H2 molecule, leaving one (or two) atoms in the vacancy.
Xiang et al
Low temperature has been a major challenge for lithium-ion batteries to maintain satisfied electrochemical performance, as it leads to poor rechargeability and low capacity retention. Commercial electrolytes of lithium-ion battery rely heavily on ethylene carbonate (EC), and its high melting point (36.4 °C) severely limits the use of batteries below 0 °C. In this work, we demonstrate that using the low melting point carboxylate of methyl propionate (MP) and vinyl fluorocarbonate (FEC) based electrolyte can overcome the low-temperature cycle limitation. Compared with carbonate electrolytes, MP has lower binding energy with Li+, which is essential to improve the low-temperature performance of the battery, and FEC is an effective component to inhibit the side reaction with the electrode of lithium metal. The carefully formulated MP-based electrolyte can generate a solid electrolyte interface with low resistance and rich in inorganic substances, which is conducive to the smooth diffusion of Li+, allowing the battery to successfully cycle at a high rate of 0.5 C at -20 °C, and giving it a reversible capacity retention rate of 65.3% at -40 °C. This work designs a promising advanced electrolyte and holds the potential to overcome limitations of lithium-ion batteries in harsh conditions.
Ju et al
We report on improved high voltage operation of amorphous-In-Ga-Zn-O (a-IGZO) thin film transistors (TFTs) by 
increasing carrier density and distributing the high bias field over the length of the device which utilizes an off-set drain 
structure. By decreasing the O2 partial pressure during sputter deposition of IGZO, the channel carrier density of the high 
voltage a-IGZO TFT (HiVIT) was increased to ~1018 cm-3. Which reduced channel resistance and therefore the voltage drop 
in the ungated offset region during the on-state. To further decrease the electric field in the offset region, we applied Ta 
capping and subsequent oxidation to locally increase the oxygen vacancy levels in the offset region thereby increasing local 
carrier density. The reduction of the drain field in the offset region from 1.90 V/μm to 1.46 V/μm at 200 V drain voltage, 
significantly improved the operational stability of the device by reducing high field degradation. At an extreme drain voltage of 500 V, 
the device showed an off-state current of ~10-11 A and on-state current of ~1.59 mA demonstrating that with further 
enhancements the HiVIT may be applicable to thin-film form, low leakage, high voltage control applications.
Open all abstracts, in this tab
M A González-Reyna et al 2024 Nanotechnology 35 335602
For the first time, this study shows the nanoarchitectonic process to obtain an acetogenin-enriched nanosystem (AuNPs-Ac) using an aqueous extract from Annona cherimola Mill (ACM) composed of gold nanoparticles embedded in an organic matrix that acts as stabilizing agent and presents anti-inflammatory activity and cytotoxical effect against HepG2 cell line, promoting apoptosis. The synthesis of AuNPs-Ac was confirmed by x-ray diffraction analysis, showing metallic gold as the only phase, and the scanning transmission microscope showed an organic cap covering the AuNPs-Ac. Fourier-transformed infrared suggests that the organic cap comprises a combination of different annonaceous acetogenins, alkaloids, and phenols by the presence of bands corresponding to aromatic rings and hydroxyl groups. High-Performance Liquid Chromatography has demonstrated the presence of annonacin, a potent acetogenin, in the extract of ACM. An in vitro anti-inflammatory activity of the extract of ACM and the AuNPs-Ac was performed using the albumin denaturation method, showing a nonlinear response, which is better than sodium diclofenac salt in a wide range of concentrations that goes from 200 to 400 μg ml−1 with both samples. The viability assay was studied using trypan blue, treating IMR90 and HepG2 at different concentrations of AuNPs-Ac. The results defined a median lethal dose of 800 μg ml−1 against HepG2 through apoptosis according to the ratio of caspase-cleaved 9/alpha-tubulin evaluated. It was also demonstrated that the nanosystem presents a higher cytotoxic effect on the HepG2 cell line than in IMR90, suggesting a targeted mechanism. In addition, the nanosystem performs better than using only the extract of ACM in the anti-inflammatory or antiproliferative test, attributed to their higher surface area.
I I Olaniyan et al 2024 Nanotechnology 35 335301
The realization of perovskite oxide nanostructures with controlled shape and dimensions remains a challenge. Here, we investigate the use of helium and neon focused ion beam (FIB) milling in an ion microscope to fabricate BaTiO3 nanopillars of sub-500 nm in diameter starting from BaTiO3 (001) single crystals. Irradiation of BaTiO3 with He ions induces the formation of nanobubbles inside the material, eventually leading to surface swelling and blistering. Ne-FIB is shown to be suitable for milling without inducing surface swelling. The resulting structures are defect-free single crystal nanopillars, which are enveloped, on the top and lateral sidewalls, by a point defect-rich crystalline region and an outer Ne-rich amorphous layer. The amorphous layer can be selectively etched by dipping in diluted HF. The geometry and beam-induced damage of the milled nanopillars depend strongly on the patterning parameters and can be well controlled. Ne ion milling is shown to be an effective method to rapidly prototype BaTiO3 crystalline nanostructures.
Pooja Nag et al 2024 Nanotechnology
Rampant pathogenesis induced by communicable microbes has necessitated development of technologies for rapid and sustained disinfection of surfaces. Copper nanoparticles (CuNPs) have been widely reported for their antimicrobial properties. However, nanostructured copper is prone to oxidative dissolution in the oil phase limiting its sustained use on surfaces and coatings. The current study reports a systematic investigation of a simple synthesis protocol using fatty acid stabilizers (particularly essential oils) for synthesis of copper nanoparticles in the oil phase. Of the various formulations synthesized, rosemary oil stabilized copper nanoparticles (RMO CuNPs) were noted to have the best inactivation kinetics and were also most stable. Upon morphological characterization by TEM and EELS, these were found to be monodispersed (ᴓ 5-8 nm) with copper coexisting in all three oxidation states on the surface of the nanoparticles. The nanoparticles were dropcast on woven fabric of around 500 threads per inch and exposed to gram positive bacteria (Staphylococcus aureus), gram negative bacteria (Escherichia coli and Pseudomonas aeruginosa), enveloped RNA virus (phi6), non-enveloped RNA virus (MS2) and non-enveloped DNA virus (T4) to encompass the commonly encountered groups of pathogens. It was possible to completely disinfect 107 copies of all microorganisms within 40 minutes of exposure. Further, this formulation was incorporated with polyurethane as thinners and used to coat non-woven fabrics. These also exhibited antimicrobial properties. Sustained disinfection with less than 9% cumulative copper loss for upto 14 washes with soap water was observed. Based on the studies conducted, RMO CuNP in oil phase was found to have excellent potential of integration on surface coatings, paints and polymers for rapid and sustained disinfection of microbes on surfaces. 
Sunaan Malik et al 2024 Nanotechnology 35 325301
Paper is an ideal substrate for the development of flexible and environmentally sustainable ubiquitous electronic systems. When combined with nanomaterial-based devices, it can be harnessed for various Internet-of-Things applications, ranging from wearable electronics to smart packaging. However, paper remains a challenging substrate for electronics due to its rough and porous nature. In addition, the absence of established fabrication methods is impeding its utilization in wearable applications. Unlike other paper-based electronics with added layers, in this study, we present a scalable spray-lithography on a commercial paper substrate. We present a non-vacuum spray-lithography of chemical vapor deposition (CVD) single-layer graphene (SLG), carbon nanotubes (CNTs) and perovskite quantum dots (QDs) on a paper substrate. This approach combines the advantages of two large-area techniques: CVD and spray-coating. The first technique allows for the growth of SLG, while the second enables the spray coating of a mask to pattern CVD SLG, electrodes (CNTs), and photoactive (QDs) layers. We harness the advantages of perovskite QDs in photodetection, leveraging their strong absorption coefficients. Integrating them with the graphene enhances the photoconductive gain mechanism, leading to high external responsivity. The presented device shows high external responsivity of ∼520 A W−1 at 405 nm at <1 V bias due to the photoconductive gain mechanism. The prepared paper-based photodetectors (PDs) achieve an external responsivity of 520 A W−1 under 405 nm illumination at <1 V operating voltage. To the best of our knowledge, our devices have the highest external responsivity among paper-based PDs. By fabricating arrays of PDs on a paper substrate in the air, this work highlights the potential of this scalable approach for enabling ubiquitous electronics on paper.
Irene Ayuso-Pérez et al 2024 Nanotechnology 35 325206
Semiconductor nanowires (NWs) are promising candidates for use in electronic and optoelectronic applications, offering numerous advantages over their thin film counterparts. Their performance relies heavily on the quality of the contacts to the NW, which should exhibit ohmic behavior with low resistance and should be formed in a reproducible manner. In the case of heterostructure NWs for high-mobility applications that host a two-dimensional electron gas, ohmic contacts are particularly challenging to implement since the NW core constituting the conduction channel is away from the NW surface. We investigated contact formation to modulation-doped GaAs/(Al,Ga)As core/shell NWs using scanning transmission electron microscopy, energy dispersive x-ray spectroscopy and electron tomography to correlate microstructure, diffusion profile and chemical composition of the NW contact region with the current–voltage (I–V) characteristics of the contacted NWs. Our results illustrate how diffusion, alloying and phase formation processes essential to the effective formation of ohmic contacts are more intricate than in planar layers, leading to reproducibility challenges even when the processing conditions are the same. We demonstrate that the NW geometry plays a crucial role in the creation of good contacts. Both ohmic and rectifying contacts were obtained under nominally identical processing conditions. Furthermore, the presence of Ge in the NW core, in the absence of Au and Ni, was found as the key factor leading to ohmic contacts. The analysis contributes to the current understanding of ohmic contact formation to heterostructure core/shell NWs offering pathways to enhance the reproducibility and further optimization of such NW contacts.
Rahnuma Rahman et al 2024 Nanotechnology 35 325205
Stochastic neurons are efficient hardware accelerators for solving a large variety of combinatorial optimization problems. 'Binary' stochastic neurons (BSN) are those whose states fluctuate randomly between two levels +1 and −1, with the probability of being in either level determined by an external bias. 'Analog' stochastic neurons (ASNs), in contrast, can assume any state between the two levels randomly (hence 'analog') and can perform analog signal processing. They may be leveraged for such tasks as temporal sequence learning, processing and prediction. Both BSNs and ASNs can be used to build efficient and scalable neural networks. Both can be implemented with low (potential energy) barrier nanomagnets (LBMs) whose random magnetization orientations encode the binary or analog state variables. The difference between them is that the potential energy barrier in a BSN LBM, albeit low, is much higher than that in an ASN LBM. As a result, a BSN LBM has a clear double well potential profile, which makes its magnetization orientation assume one of two orientations at any time, resulting in the binary behavior. ASN nanomagnets, on the other hand, hardly have any energy barrier at all and hence lack the double well feature. That makes their magnetizations fluctuate in an analog fashion. Hence, one can reconfigure an ASN to a BSN, and vice-versa, by simply raising and lowering the energy barrier. If the LBM is magnetostrictive, then this can be done with local (electrically generated) strain. Such a reconfiguration capability heralds a powerful field programmable architecture for a p-computer whereby hardware for very different functionalities such as combinatorial optimization and temporal sequence learning can be integrated in the same substrate in the same processing run. This is somewhat reminiscent of heterogeneous integration, except this is integration of functionalities or computational fabrics rather than components. The energy cost of reconfiguration is miniscule. There are also other applications of strain mediated barrier control that do not involve reconfiguring a BSN to an ASN or vice versa, e.g. adaptive annealing in energy minimization computing (Boltzmann or Ising machines), emulating memory hierarchy in a dynamically reconfigurable fashion, and control over belief uncertainty in analog stochastic neurons. Here, we present a study of strain engineered barrier control in unconventional computing.
Mathijs G C Mientjes et al 2024 Nanotechnology 35 325602
Topological crystalline insulators (TCIs) are interesting for their topological surface states, which hold great promise for scattering-free transport channels and fault-tolerant quantum computing. A promising TCI is SnTe. However, Sn-vacancies form in SnTe, causing a high hole density, hindering topological transport from the surface being measured. This issue could be relieved by using nanowires with a high surface-to-volume ratio. Furthermore, SnTe can be alloyed with Pb reducing the Sn-vacancies while maintaining its topological phase. Here we present the catalyst-free growth of monocrystalline PbSnTe in molecular beam epitaxy. By the addition of a pre-deposition stage before the growth, we have control over the nucleation phase and thereby increase the nanowire yield. This facilitates tuning the nanowire aspect ratio by a factor of four by varying the growth parameters. These results allow us to grow specific morphologies for future transport experiments to probe the topological surface states in a Pb1–xSnxTe-based platform.
Ashna Rajeev et al 2024 Nanotechnology
Fabrication and operation on increasingly smaller dimensions have been highly integrated with the development of smart and functional materials; they are key to many technological innovations to meet economic and societal needs. Along with many researchers worldwide, the Waterloo Institute for Nanotechnology (WIN) has long realized the synergetic interplays between nanotechnology and functional materials and designated "Smart & Functional Materials" as one of its four major research themes. Thus far, WIN researchers have utilized the properties of smart polymers, nanoparticles, and nanocomposites to develop active materials, membranes, films, adhesives, coatings, and devices with novel and improved properties and capabilities. In this review article, we aim to highlight some of the recent developments on the subject including our own research and key research literature in the context of the UN Sustainability development goals.
Guanxuan Lu et al 2024 Nanotechnology
The development of 6G networks has promoted related research based on terahertz communication. As submillimeter radiation, signal transportation via terahertz waves has several superior properties, including non-ionizing and easy penetration of non-metallic materials. This paper provides an overview of different terahertz detectors based on various mechanisms. Additionally, the detailed fabrication process, structural design, and the improvement strategies are summarized. Following that, it is essential and necessary to prevent the practical signal from noise, and methods such as wavelet transform, UM-MIMO and decoding have been introduced. This paper highlights the detection process of the terahertz wave system and signal processing after the collection of signal data.
Narendra Chaulagain et al 2024 Nanotechnology 35 315502
The fluorescence quenching of carboxyl-rich g-C3N4 nanoparticles was found to be selective to Ag+ and Ce3+ with a limit of detection as low as 30 pM for Ag+ ions. A solid-state thermal polycondensation reaction was used to produce g-C3N4 nanoparticles with distinct green fluorescence and high water solubility. Dynamic light scattering indicated an average nanoparticle size of 95 nm. The photoluminescence absorption and emission maxima were centered at 405 nm and 540 nm respectively which resulted in a large Stokes shift. Among different metal ion species, the carboxyl-rich g-C3N4 nanoparticles were selective to Ag+ and Ce3+ ions, as indicated by strong fluorescence quenching and a change in the fluorescence lifetime. The PL sensing of heavy metal ions followed modified Stern–Volmer kinetics, and CNNPs in the presence of Ag+/Ce3+ resulted in a higher value of Kapp (8.9 × 104 M−1) indicating a more efficient quenching process and stronger interaction between CNNP and mixed ions. Sensing was also demonstrated using commercial filter paper functionalized with g-C3N4 nanoparticles, enabling practical on-site applications.