Einzeltreffer — DigiBib

Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology. The main aim of this book is to highlight and address recent breakthroughs in the range of emerging applications in power electronics and in harmonic and electromagnetic interference (EMI) issues at device and system levels as discussed in ?robust and reliable power electronics technologies, including fault prognosis and diagnosis technique stability of grid-connected converters and ?smart control of power electronics in devices, microgrids, and at system levels.

Titel:	Applications of Power Electronics
Autor/in / Beteiligte Person:	Blaabjerg, Frede ; Dragicevic, Tomislav ; Davari, Pooya
Link:	View record at Directory of Open Access Books (Volltext)
Veröffentlichung:	MDPI - Multidisciplinary Digital Publishing Institute, 2019
Medientyp:	E-Book
Umfang:	500
ISBN:	978-3-03921-020-6 (print) ; 978-3-03921-021-3 (print)
DOI:	10.3390/books978-3-03921-021-3
Schlagwort:	Q-factor lithium-ion power battery pack electromagnetic field (EMF) expert systems total harmonic distortion (THD) current-fed inverter rotor design class-D amplifier LCL-S topology current switching ripple system in package energy storage modelling smart micro-grid embedded systems equivalent inductance SHIL permanent magnet static var generator (SVG) permanent magnet synchronous motor (PMSM) control strategy and algorithm digital control zero-voltage switching (ZVS) SOC estimator electric power optimal design electromagnetic field interference (EMI) line frequency instability analog phase control five-phase permanent magnet synchronous machine distribution generation leakage inductance adjacent two-phase open circuit fault (A2-Ph) chaotic PWM electric vehicles CMOS chaotic circuit series active filter cascaded topology total demand distortion efficiency motor triangular ramp generator 4T analog MOS control inductive coupling induction machines nanocrystalline core semi-active bridge multi-level control simulation models voltage source inverters (VSI) battery management system BMS voltage source converter current control loops droop control particle swarm optimization variable control gain state of charge SoC extended Kalman filter transient control multi-objective optimization composite equalizer converter DHIL five-leg voltage source inverter axial flux machines bifurcation active receivers field programmable gate array Nyquist stability analysis electric vehicle static compensator stability common-mode inductor DC–DC converters support vector machines electromagnetic compatibility real-time simulation passive equalization matrix converters wireless power transfer digital phase control compensation topology volt-per-hertz control (scalar control) switching losses voltage control hybrid converter bidirectional converter coupling factor selective harmonic elimination method power electronics soft switching optimization design multilevel inverter five-phase machine phase-shift control lithium-ion battery voltage boost VPI active damping control parameter identification electrical engineering communications current control DC–DC conversion battery management system GaN cascode single-switch high-frequency modeling synchronous motor power quality water purification power factor correction (PFC) composite active vectors modulation (CVM) digital signal controller line start power density hardware in loop fault diagnosis multi-level converter (MLC) induction motor dual three-phase (DTP) permanent magnet synchronous motors (PMSMs) neural networks electromagnetic interference filter battery chargers power converter harmonics multiphase space vector modulation torque ripple power factor correction electrical drives modular multilevel converter (MMC) active power filter double layer capacitor (DLC) models PMSG response time resonator structure floating-point effect factors DC-link voltage control sliding mode control phasor model technique wireless power transfer (WPT) slim DC-link drive fault-tolerant control lithium-ion batteries DC-AC power converters conducting angle determination (CAD) techniques variable speed pumped storage system impedance-based model one cycle control renewable energy sources series-series compensation cogging torque active rectifiers three-level boost converter (TLBC) DC-link cascade H-bridge (DCLCHB) inverter battery energy storage systems filter power management system improved extended Kalman filter dead-time compensation disturbance observer reference phase calibration frequency locking space vector pulse width modulation (SVPWM) predictive controllers nine switch converter transmission line spread-spectrum technique energy storage electromagnetic interference renewable energy resources control harmonic linearization misalignment plug-in hybrid electric vehicles high level programing nearest level modulation (NLM) magnetic equivalent circuit EMI filter permanent-magnet machines real-time emulation switched capacitor back EMF fixed-point HF-link MPPT converter condition monitoring WPT standards switching frequency switching frequency modelling high frequency switching power supply field-programmable gate array three-phase bridgeless rectifier ice melting AC–DC power converters hybrid power filter PSpice microgrid control total harmonic distortion grid-connected inverter dynamic PV model fuzzy boost converter SiC PV Supply voltage doubling nonlinear control distributed control power system operation and control one phase open circuit fault (1-Ph) direct torque control (DTC) battery modeling non-linear phenomena frequency-domain analysis advanced controllers vector control fixed-frequency double integral sliding-mode (FFDISM) power converters modulation index DC-DC buck converter small signal stability analysis active equalization voltage source inverter hardware-in-the-loop current source synchronization grid-connected VSI synchronous generator fault tolerant control thema EDItEUR:T Technology, Engineering, Agriculture, Industrial processes:TB Technology: general issues:TBX History of engineering and technology TA1-2040 T1-995
Sonstiges:	Nachgewiesen in: Directory of Open Access Books Sprachen: English Document Type: eBook File Description: image/jpeg Language: English Rights: Attribution-NonCommercial-NoDerivatives 4.0 International ; URL: https://creativecommons.org/licenses/by-nc-nd/4.0/ Notes: 33700

Klicken Sie ein Format an und speichern Sie dann die Daten oder geben Sie eine Empfänger-Adresse ein und lassen Sie sich per Email zusenden.

BibTeX Citavi, JabRef, u.a.
(Literaturverwaltung)

PDF kein Volltext!
(Merkzettel, Notizen)

RIS Endnote, Citavi u.a.
(Literaturverwaltung)

MODS
(XML zur Weiterverarbeitung)

oder

Wählen Sie das für Sie passende Zitationsformat und kopieren Sie es dann in die Zwischenablage, lassen es sich per Mail zusenden oder speichern es als PDF-Datei.

Gewünschter Zitations-Stil:

oder

Bitte prüfen Sie, ob die Zitation formal korrekt ist, bevor Sie sie in einer Arbeit verwenden. Benutzen Sie gegebenenfalls den "Exportieren"-Dialog, wenn Sie ein Literaturverwaltungsprogramm verwenden und die Zitat-Angaben selbst formatieren wollen.

Applications of Power Electronics